Waterproof Repair Spraying

One component self spraying leak mending king, waterproof and film-forming. It is specially developed for waterproof repair and weak and easily exposed points of pipe root, nozzle, corner, crack, slotted step line, etc. in waterproof facilities. It is more suitable for narrow and complex space difficult to reach by brushing tools. The work of rejection solves the pain of leakage. In actual construction, it is often encountered that there are exposed steel bars or iron wires on the surface of buildings, resulting in leakage after corrosion everywhere. This product is designed with anti-corrosion and anti rust functions separately, and small measures are taken to solve big problems.

Usage method
1. Grass roots preparation: the grass roots shall comply with relevant national specifications, be solid and tidy. In case of defects, it is recommended to remove media, repair holes and cracks, and clean dust and garbage. If there are other finished products on site, please remove or shield them for protection to prevent splashing and pollution during spraying construction.
2. Construction preparation: grasp the tank body, remove the upper cover and shake it. It is recommended to align the parts to be constructed for more than 1 minute, press the nozzle and spray evenly. After repeated spraying takes one hour, it will be formed twice normally, and special parts will be treated specially.

Matters needing attention
1. Reverse the unused leak repair king and spray for 5-10 seconds to remove the residual material of the nozzle to prevent the nozzle from being blocked;
2. For the wet base course, it is necessary to remove water and moisture, and wipe off the excess water as much as possible with a rag;
3. This product is an aqueous liquid, please keep away from open fire when using;
4. The construction temperature is 0-45 ° C.